How do you reset the oil service meter on a 318i.?

Turn the ignition to ';0';


Press and hold odometer button and turn the ignition to ';1';.


Hold odometer button pressed for approximately 5 seconds until the display shows: ';Inspektion Re /


Release and press odometer button again until Reset flashes


Release and press odometer button shortly.


Release and press odometer button again.


The next oil service interval will be shown and will disappear.


Oil service lamp is now reset








Note: To abort the procedure at any time: turn the ignition to ';0';.
































OR, since you have a 2000 it could be this other procedure. Depends on how late your 2000 is.





1. Locate the 20-PIN DLC Connector. It is located under the hood, passenger side empty compartment.


2. Turn the key to position 2. key position before the engine start.


3. For OIL RESET, just ground PIN 7 and PIN 19 for 3 seconds.How do you reset the oil service meter on a 318i.?
You need to be more specific which year 318i you are talking about.





All BMWs have a service port in the engine compartment to allow either a BMW diagnostic computer or a reset tool to reset your SERVICE INDICATOR.





For newer models from 2000 up, they can be reset from inside the car without any tools or equipment.How do you reset the oil service meter on a 318i.?
You HAVE to give more information! 318i's have been available for well over 20 years through many diagnostics systems.


Search (Google) ';BMW SI reset Exx';. Exx for your generation: E30 for 1984-1991, E36 for 1992 1999, E46 for 1999 to 2005 and E90/91/92/93 the current model. SI for ';Service Indicator';.


E30's, E36's, and E46's will have a different procedure depending on year. Diagnostic port (if applicable) location will also be year specific.